///THE SPRAY BEAM FOR ALUMINIUM FOIL ROLLING MILL

THE SPRAY BEAM FOR ALUMINIUM FOIL ROLLING MILL

Send Inquiry
Categories: ,

Description

The spray beam can effectively control the local thermal convexity of the work roll during the rolling process, so that the coil shape can be better controlled. The switch quantity control mode is adopted to control the size of the process lubricating oil injection quantity through the switching times of the solenoid valve, the opening and closing of the spray valve is controlled by the solenoid switch, and the injection frequency is changed to realize the control of the injection quantity. During the working process, the operator can operate on the touch screen according to the actual situation of the board, and change the corresponding nozzle flow at any time;

The two ends of each spray beam are provided with connecting pipes for process lubricating oil, and a quick joint connecting the compressed air pipeline is provided in the middle of the spray beam. Based on the integrated spray valve and spray valve baffle installed on the spray beam.

The spray beam adopts a segmented spray method, which is composed of the spray volume of upper and lower work rolls. Each spray beam is equipped with a spray valve, and the spray valve spacing is 52mm.

A filter is installed before the injection volume to filter impurities in the rolling oil to prevent the nozzle from clogging.

Ability: Max.4500L/min

Cooling oil: mineral oil

Your Name (required)

Your Email (required)

Your Message